SIGLENT Technologies uses a broad range of products that utilize the USBTMC unified protocol to communicate with the host computer and control. Users can use SIGLENT provided PC software to send commands to remotely control the instrument.
- Gossen Metrawatt/GMC-I Masurement & Test Product Line. Electrical measuring and test technology made in Germany: Handheld Digital Multimeters and Insulation Testers: Universal and basic digital multimeters, for general purpose applications. Special digital multimeters for advanced applications, e.g. Ex, T-Com, avionics, automotive etc.
- 3 Installing the USB Device Drivers The USB device drivers have to be installed in order to operate test instruments or a memory adapter (with USB port) at a PC. Suitable IrDa-USB adapters must be used for devices with RS 232 port. GMC-I Driver Control software for installing the USB device drivers can be downloaded from our website.
- The SECULIFE ST PRO IQ supports all required measurement and test functions for testing the effectiveness of protective measures in medical devices and systems - both with predefined and with programmable test sequences, which are necessary according to the test standards VDE 0701-0702, IEC/EN 62353 (VDE 0751) and IEC/EN 60601.
In addition, you can use NI-MAX (National Instruments Measurement and Automation Explorer) for instrument control.
Here is an example of using SIGLENT EasyScope Oscilloscope software via the USB interface for remote control:
DriverHive is a driver updater service that will scan your computer's installed devices, identify the best fitting drivers and provide them in an easy, convenient format. Individual drivers may be available on manufacturer websites at no charge.
1. Connect the oscilloscope to the controlling computer using a USB cable. The computer should notify you that a new USBTMC device has been connected. You can check the Device Manager (Windows OS) for more details.
2. Install the USB driver. The oscilloscope is a USBTMC device. If your PC has installed EasyScope software and NI software, the first time the oscilloscope and PC are connected correctly and turned on, the PC Hardware Update Wizard dialog box will pop up. Follow the prompts of the installation wizard “USB Test and Measurement Device” driver.
Gmc-i Messtechnik Usb Devices Driver Vga
The steps are as follows:
- Check the “Specify the installation location (Advanced) (s) from the list.”
- Click “Next”
- Check the “Do not search, I will choose the driver to install (D).”
- Click “Next” and “Next”. The wizard is installing the software, please wait…
Gmc-i Messtechnik USB Devices Driver
Click Finish to install the driver successfully.